Troubleshooting; Customer Service - Sensica sensiLift ST100 Serie Manual Del Usuario

soft damp cloth or paper
towel. Make sure all
electrodes area including
the temperature sensors,
silicone cover, are cleaned
thoroughly.
•
Keep the Sensilift dry. Never
place, store or use Sensilift
near bathtubs, showers,
basins or other vessels
containing water as this may
cause severe electrocution.
•
If you do not plan on using
your Sensilift for a long
period of time, it is
recommended to keep it
clean and stored.
•
If you plan to travel and take
your Sensilift with you, you
should store it in the original
box and follow the
maintenance instructions.

Troubleshooting

If you experience any problems
with the Sensilift device, please
refer to the information below
to try to resolve it:
•
If the Sensilift device does
not turn on:
a. Make sure that the
power cord is plugged
properly into the electrical
outlet and into the device
power socket.
b. Make sure that the
power outlet has power.
• If the Sensilift does not
deliver RF signal energy (you
cannot feel a warm
sensation):
Verify there is full contact
with the skin and the "Base
Gel" was applied on the skin.
The RF signal will be
activated only when both of
the treatment fingers are in
full contact with the skin. See
Indicator stated in "User
interface description"
section.
•
General Error:
a. In case of dirt or debris
are stuck on the treatment
fingers, you should clean the
electrodes according to the
cleaning section. If you can't
get the area clean, contact
our Customer Service.
b. In case of a general error,
reset the device – unplug
the power cord from the
electrical outlet on the wall,
wait 10 sec and then
reconnect it.
c. If you still have problems
with your device, please
contact our customer
service.
17