Technical Specifications; Filtering And Lubrication Requirements - Truper TPN-883 Instructivo

Technical Specifications

Description
Length and Height
Cylinder Diameter
Traction Force
Type of Rivet
Rivet Capacity
Work Pressure
Weight with no accessories
Air inlet Connection
Air Consumption
Noise Level
CAUTION Consider the increase of the line pressure or the inner diameter of the hose to compensate the use of
very long hoses (more than 26 ft). The hose minimum inner diameter shall be 3/8" and the connectors shall be 1/4 NPT.
Use good quality and the right size of couplers and accessories.

Filtering and Lubrication Requirements

CAUTION Dust, water and lack of oil specific for using in pneumatic tools are the main cause of potential flaws with the
tool. We recommend installing a
lubrication reducing 80% oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool. Consult the air compressor
instructions
Air
Compressor
TPN-883
Code
8" x 10 ½"
3/32", 1/8", 5/32", 3/16"
Brand UNI-LL-1/4 centralized filter-oil feeder system. This system assures
UNI-LL-1/4
Centralized
Filter-Oil
Feeder System
18240
Rivet gun
3"
1 950 lb
Blind rivet
80 PSI - 100 PSI
3,5 lb
1/4 NPT
3,5 CFM
76,3 dB
Air Hose
TPN-884
18241
7" x 12 ¾"
3 ½"
3 110 lb
3/32", 1/8", 5/32", 3/16",
7/32", 1/4"
4,4 lb
4,2 CFM
85 dB
Adapter
(not included)
ENGLISH
3