Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Figure 6
Figure 7
Helpful Videos – www.hzsupport.com
7. Mount chime extender. Use either screws or
double sided tape to mount push button.
• Screw Mounting: To mount with screws,
temporarily remove the batteries and place
ON
chime extender against mounting surface
1 2
and mark the two screw holes. Drill two
3/16 in. pilot holes and insert wall anchors.
Align holes in chime extender with wall
anchors and insert two screws (see Figure
6). Tighten securely and replace batteries
and cover.
• Tape Mounting: When attaching chime
extender with double-sided tape, remove
paper from both sides of the double-sided
tape and apply to clean surface (see Figure
7). Install cover.
8. Adjust volume control. Unplug chime and
adjust volume control on back of chime to
desired volume (see Figure 1). Plug chime
back into wall outlet.
Helpful Answers – 1-800-858-8501
3
Tabla de contenido
