Directed Automate 7145A Guia Del Usuario página 11

Combo Valet
The Combo Valet command is used to turn on/off both Alarm Valet
and Start Valet together.
If both Valets are off then both will be turned on.
If one or both Valets are on, then they will be turned off.
Manual Valet Modes
Use the following routine to manually turn on/off the Valet Modes,
turning both on manually achieves Combo Valet:
Turn the ignition ON and then OFF.
1.
• Alarm/System Valet:
Press and release the Control Center button once.
Alarm Valet will turn on/off accordingly. The Control
Center LED will be on while Alarm Valet is on and will
be off when Alarm Valet is off. The siren/horn also
sounds to confirm.
If your product has System Valet: Along with the Control
Center LED being on, the parking lights will flash nine
times in rapid succession when turned on, and nine
times in slow succession when turned off.
• Start Valet:
Press and hold the Control Center button for five sec-
onds.
The parking lights flash nine times in rapid succession
when turned on, and nine times in slow succession
when turned off.
Emergency Override
The following procedure Disarms the system when a programmed
remote is not available. Number of presses__________
Turn the ignition ON.
1.
2. Press the Control Center button the correct number of times
(the default is 1 press).
6
© 2017 Directed. All rights reserved.