Valet Mode - Directed Automate 7145A Guia Del Usuario

When you are ready to drive the vehicle:
Insert the ignition key and turn it to the On position.
Press the brake pedal.
Disengage the parking brake.
Place the vehicle in gear and drive to your destination.
Note: If the brake pedal is pressed before the key is in the ON
position, the engine will shut down.
While the vehicle is running during remote start operation, the sys-
tem monitors the ve hi cle and automatically shuts down the engine
if the system receives any of the following:
• The brake pedal is pressed.
• The hood is opened.
• Runtime (12, 24, or 60 minutes) expires.
• The remote start activation procedure from the remote is re-
peated.

Valet Mode

Remote Vale Modes
Combo Valet can be activated and deactivated from the remote
control by pressing the
Alarm Valet/System Valet
The Alarm Valet mode will disable included alarm features when
armed/locked. It also disables any passive arm/lock settings if
programmed on. The system confirms as described in the Manual
Valet Mode section.
Start Valet
The Start Valet mode will disable remote start features until turned
off. These systems do not have separate alarm valet or start valet
functions.
© 2017 Directed. All rights reserved.
and buttons simultaneously.
5