Premium PIM10 Manual De Instrucciones página 8

Tabla de contenido
AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.
ELECTRICAL CONNECTION
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL
SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED
AVANTI PRODUCTS SERVICE CENTER.
THIS ICE MAKER SHOULD BE PROPERLY GROUNDED FOR YOUR SAFETY. THE POWER
CORD OF THIS ICE MAKER IS EQUIPPED WITH A THREE-PRONG PLUG WHICH MATES WITH
STANDARD THREE PRONG WALL OUTLETS TO MINIMIZE THE POSSIBILITY OF ELECTRICAL
SHOCK.
DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG
FROM THE POWER CORD SUPPLIED.
NEVER USE AN EXTENSION CORD TO CONNECT POWER TO THE UNIT.
NEVER USE A TWO-PRONG GROUNDING ADAPTER.
WHERE A TWO-PRONG WALL RECEPTACLE IS ENCOUNTERED, CONTACT A QUALIFIED
ELECTRICIAN TO HAVE IT REPLACED WITH A 3-PRONG RECEPTACLE IN ACCORDANCE
WITH APPLICABLE ELECTRICAL CODES.
THIS ICE MAKER REQUIRES A STANDARD 115/120 VOLTS A.C.~/60HZ ELECTRICAL OUTLET
WITH THREE-PRONG GROUND.
THE CORD SHOULD BE SECURED BEHIND THE ICE MAKER AND NOT LEFT EXPOSED OR
DANGLING TO PREVENT ACCIDENTAL INJURY.
EXTENSION CORD
BECAUSE OF POTENTIAL SAFETY HAZARDS UNDER CERTAIN CONDITIONS, IT IS STRONGLY
RECOMMENDED THAT YOU DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
HOWEVER, IF YOU MUST USE AN EXTENSION CORD IT IS ABSOLUTELY NECESSARY THAT IT
BE A UL/CUL-LISTED, 3-WIRE GROUNDING TYPE APPLIANCE EXTENSION CORD HAVING A
GROUNDING TYPE PLUG AND OUTLET AND THAT THE ELECTRICAL RATING OF THE CORD BE
115 VOLTS AND AT LEAST 10 AMPERES.
CONNECTING THE WATER SUPPLY
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION
ALL THE NECESSARY HARDWARE IS NOT PROVIDED FOR INSTALLATION SO IT IS
NECESSARY TO HIRE A PROFESSIONAL LICENSED PLUMBER TO COMPLETE THE
INSTALLATION.
CONNECT TUBING (SUPPLIED WITH UNIT) TO THE NEAREST COLD WATER SOURCE.
CONNECT SUFFICIENT TUBING TO THE UNIT TO ALLOW THE APPLIANCE TO BE MOVED
FREELY FOR CLEANING AND SERVICE. ALSO MAKE SURE THAT THE TUBING IS NOT
PINCHED OR DAMAGED DURING TRANSPORTATION.
POSITION UNIT TO ALLOW FREE AIRFLOW THROUGH THE FRONT GRILL (
WIPE OUT INSIDE OF UNIT AND ICE BUCKET WITH A DAMP CLOTH.
WARNING
WARNING
YOU MUST USE A LICENSED PLUMBER
8
SEE SKETCH
SKETCH 1
1).
Tabla de contenido
loading

Tabla de contenido