Ordering Replacement Parts; Table 3 Service Part List - Federal Signal SST3GCX-MV Instrucciones De Instalación Y Mantenimiento

Adequate hearing protection should be worn if standing within close proximity to
device while testing. Recommendations in the OSHA Sound Level Standard (29 CFR
1910F) should not be exceeded.
A. After installation is complete, be sure to test the system to verify that each
amplified siren operates satisfactorily.
B. After completion of initial system test, establish a program for periodic testing of
this device.
C. Provide a copy of these instructions for the Safety Engineer, system operator(s)
and maintenance personal.
Even if your warning system is operating properly, it may not be completely effective.
People may not hear or heed your warning signal. You must recognize this fact and
ensure that your warning signal achieves its intended effect through proper test/training
sequences within your specific application(s).

Ordering Replacement Parts

Replacement parts listed within this manual may be ordered. Due to certification, certain
component parts are not available for field replacement. Devices having parts with this
type of damage must be either replaced entirely or returned to Federal Signal for service.
To order, call Federal Signal Customer Support at +1 708-534-3400 or +1 800-344-4634.
Substitution of any components may impair suitability for Class I, Division 2, Groups A,
B, C, and D; Class II, Division 2, Groups F and G; and Class III.
Table 3: Service Part List
Description
Speaker Assembly
PCBA
Connector Plug
Installation and Maintenance Instructions
Remotely Selectable Siren
Part Number
K8593103
K20000104
K140340
9