Programming Instructions; Programming The Clock; Adjusting The Time - Hobby ClimaControl Instrucciones De Uso

5. Programming instructions

To activate program mode, press the
The ▲ and ▼ buttons are used to switch between the various programming main levels: Clock – Humidity – Tempe-
rature – Timer.
To exit program mode from main level, press and hold the
90 seconds. To switch from sub to main level as well hold the

5.1 Programming the clock

5.1.1 Adjusting the time

The clock symbol fl ashes when program mode is active.
button, the hours will fl ash – "12".
Press the
Use the ▲ and ▼ buttons to set the hours between 0 and 23.
button and the minutes will fl ash - "00".
Press the
Use the ▲ and ▼ buttons to set the minutes between 0 and 59.
button, the seconds will fl ash - "00".
Press the
Use the ▲ and ▼ buttons to set the seconds between 0 and 59.
Note: Once the clock has been set at least once, you can use ▲ or ▼ to directly access the settings "HUM", "TEMP"
or "TIME".
Attention: The ClimaControl system does not automatically switch between summer time and winter time.
This change must be entered manually.
8
button.
button for 3 seconds or do not press any buttons for
button for 3 seconds.