Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Tools required: Allen wrench (provided), Phillips screwdriver, mallet, power drill, and 3/8" drill bit.
11. Position the assembled tower at the desired location against a wall. If necessary, adjust the
pre-attached Floor Levelers on the bottom front of the side frames (A and B) to level the unit.
12. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint
Hardware to attach the tip-over restraint to the Spine (H) and the wall.
NOTE: Young children can be seriously injured by tipping furniture. You must install the
Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any
accidents or damage. The tipping restraint is intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraint is not an earthquake restraint. If
you wish to add the extra security of earthquake restraints, they must be purchased and
installed separately.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing
Assembly Instructions
1-866-942-5362
Page 8
Stock # AVT-22E
Factory No. 10944
Tabla de contenido
