General Safety Instructions - DUALSUN FLASH Instrucciones De Instalación, Operación Y Mantenimiento

1.2 General safety instructions

Please read this installation manual thoroughly and in detail in order to be able to fully exploit the functionality of
the product. DualSun disclaims all liability for defects and damages resulting from failure to comply with the
installation instructions (improper use, incorrect installation, handling error, etc...).
Installation, use and maintenance instructions - DualSun FLASH
•
It is important to follow these instructions for the safety of people. Improper
assembly may cause serious injury. The end user must keep these safety instructions.
•
For installations on roofs, it is necessary to respect the safety standards of the
persons, relating to roof work and sealing of roofs and relating to scaffolding work
with safety net by mounting the respective devices before starting the work. Refer
to the recommendation published by the national risk prevention organization.
•
The use of gloves is mandatory when handling the panels to avoid any risk of injury
or burns.
•
Installation, control, commissioning, maintenance and troubleshooting of the
system must only be carried out by qualified personnel.
•
The correct operation of the installation is guaranteed only if the installation and
assembly have been made in the rules of art.
•
Installation should not be used if there are signs of damage.
•
Unplug all connecting cables from the power supply before intervening on the
installation.
•
All electrical work must be carried out according to local directives.
•
The entire solar installation must be mounted and operated in accordance with the
recognised technical rules.
V1.3 – April 2020
Page 4 sur 18