Cleaning The Dust Filter - Comfort Home Products B Disc 6 Manual De Instrucciones

PLACEMENT OF THE UNIT IN THE ROOM: For best results and the most
effective heating, place the unit on the floor approximately 3 feet away from any
wall. The unit can be placed on carpeting.
STORAGE: Coil cord and secure with plastic fastener on cord and store heater
in its original packaging, in a safe place where connector and cord will not be
damaged.
CLEANING your DiscFurnace: To clean the unit, unplug it first, use a
moistened clean, soft cloth to gently remove dirt from its surface. Do not use
cleaning liquids or other chemicals on the heater. Make sure not to get the
ceramic heating elements wet. Allow the unit to dry completely.
CLEANING THE DUST FILTER: (refer to BACK VIEW illustration): The dust
filter collects dirt and dust from air circulating through the unit. To clean the
filter, unplug the heater, then remove the dust filter cover by pulling the tabs
which are located on each side. Rinse the filter with warm water and allow it to
dry completely before placing it back behind the unit and reinstalling the filter
cover.
DO NOT use the unit in Chlorine gas, Sulphur Dioxide, inert or other
GAS REDUCING ATMOSPHERES. Use in such environments will
result in obvious darkening/discoloration of the heating elements
which will eventually deteriorate and arching may result.
WARNING
6