Al-Module 4504; Differences To An Isdn Line - AGFEO AL-Modul 4504 Instrucciones De Instalatión

English

AL-Module 4504

You may connect up to 4 analogue exchange lines to this module. The module supports
DTMF dialling and CLIP, however the latter would have to be enabled by your network
operator and may be chargeable. Should your network operator support CLI, then this will be
presented via the AL4504 module to the system. CLIP* will also be entered into the call log
and call management system. (*CLIP (Calling Line Identity Presentation) is a feature which
will display the telephone number and or name of the calling party before you answer the
call.)The PABX compares the received CLIP information with the entries of the system
telephone book and if a match is found will replace the calling telephone number with the
name as it is entered in the system telephone book. This information will also be used by the
call log and call management system. CLI will also be presented to analogue caller id
telephones, providing a Module T 407 has been installed. If necessary the AL4504 can be
updated.
Important:
For instructions on how to install this module in your Telephone System, please read the
'Module Installation Manual'
A maximum of four modules may be used per system.
System Requirements
This module works in all AS 40 Ps, AS 4000s fitted with a P 400-1 processor module and AS
100 ITs fitted with a P 400 IT processor module and firmware from V. 6.5 upwards, AS 43,
AS 45 and AS 200IT.
This Pack includes:
1 AL-Module 4504
1 Installation instructions
1 Self adhesive label for slot description

Differences to an ISDN Line

Unlike to the protocol based ISDN line, the apparatus connected to the analogue line will not
receive a call progress report from the telephone network. For instance the connected device
on an analogue line will not receive a confirmation that the called party has answered the
call. This will result in the following difference between an analogue exchange line and an
ISDN line:
The moment the exchange line has been seized is the time the call will be logged as to have
taken place.
TK Suite Bill will log a call as being completed or have taken place as soon as an exchange
line has been seized, even if the line is still ringing or engaged. MF overdialling is possible
but will not be recognised by the system as such. This will result that the complete telephone
number and overdialled number will be stored in the call log and last number redial.
8