Tabla de contenido
Su bote Solstice serie Sportster viene equipado con un montante de contrachapado marino para el
montaje rápido y fácil de un motor eléctrico o de gasolina. Su bote Solstice serie Sportster puede
acomodar un motor con una potencia de hasta 4 HP. Se recomienda encarecidamente no usar un
motor con una potencia que supere los 4 HP.
PIEZAS INCLUIDAS CON EL BOTE
3 tablillas de aluminio del piso
1 asiento de banco de aluminio
1 kit de reparación con material para parches y llave para válvulas
2 remos plegables de aluminio
1 bolsa para transporte
1 folleto de instrucciones
1 COF (Certificado de Origen del Fabricante) (incluyendo encuesta y tarjeta de registro para la garantía)
1 manual de instrucciones
SI TIENE CUALQUIER PREGUNTA O PROBLEMA CON SU PRODUCTO SOLSTICE, NO SE DIRIJA AL DISTRI-
BUIDOR. NOSOTROS SOMOS LOS EXPERTOS Y ESTAMOS AQUÍ PARA AYUDAR. PÓNGASE EN CONTACTO
DIRECTAMENTE CON NOSOTROS AL (631) 254-2155 o HYPERLINK "mailto:[email protected]"
[email protected]. TENGA EL NOMBRE DE SU PRODUCTO Y EL NÚMERO DEL MODELO AL
ALCANCE. SOLUCIONAREMOS CUALQUIER PROBLEMA O RESPONDEREMOS SUS PREGUNTAS
DIRECTAMENTE.
18
MONTAJE DEL MOTOR
1 bote
1 inflador de pie
1 hoja de garantía
11. Do not allow unattended children in the boat. Always make sure that at least one responsible
adult is supervising all children and those who do not know how to swim AT ALL TIMES.
12. Always maintain the proper boat safety equipment.
13. Your boat is designed to be a storable, seasonal boat. If the boat will not be in use year-round, it
is STRONGLY RECOMMENDED that you deflate the boat and dry it thoroughly, and store it in a
protected area for the off-season. This will help extend your boat's life and prevent a safety
hazard from developing while the boat is not in use.
14. WARNING: Certain household cleaning solvents, chemicals and other liquids (such as
battery acid, oil and gasoline) could damage the PVC fabric. In the event of spill or
mishandling, you should check for leaks and inspect for structural integrity. Use a mild
soap to clean the boat, rinse thoroughly. Do not use harsh chemicals for cleaning.
ASSEMBLY
1. Find a flat field and make sure that the area you have selected to set up the boat is completely
free of stones, sticks, sharp objects or other foreign debris.
2. Carefully unfold the boat, spreading out the tubes and floor to make them as smooth as
possible. NOTE: For ease of assembly, it is preferable to set up the boat on a warm and sunny
day. If time permits, expose the unrolled boat to direct sunlight for 1 hour or more, so that the
boat material will be more flexible during assembly. CAUTION: DO NOT DRAG THE BOAT, AS IT
MAY TEAR THE BOAT OR CAUSE OTHER DAMAGE. We will not be held responsible for damage
caused to the boat due to mishandling or failure to follow these instructions.
3. Slide the aluminum floor slats through the sleeves in the floor prior to inflating.
4. Inflate the boat's chambers in numbered sequences that are printed next to the valves. It is
very important to follow the numbered sequence: Failure to do so will result in an improperly
inflated boat. You can use a hand or foot operated air pump to inflate the boat. Do not use
high-pressure air compressors. Inflate each air chamber in the number sequence until all
chambers are full. WARNING: Do not over inflate. Maximum pressure for all air chambers
should be 0.15bar (2.17PSI). #20086: universal HR valve adaptor & pressure gauge not
included. Note: It is easier to install the bench seat when the boat is only partially inflated.
A1
DIAGRAM #1
B
A2
3
Tabla de contenido
