Lanaform ULTRA CLEANER Manual Del Usario página 4

supplier's after-sales service.
EN
• Do not dismantle the appliance, as this will invalidate the guarantee.
• Never use this unit if the power cable or the plug is damaged. If the unit is not working properly, has fallen into water or
has been damaged, please return it to your retailer for inspection and repair.
CAUTION:
• The ultrasonic cleaner might cause any inlaid or worn elements to become detached. Do not use the tank for cleaning
any easily spoilt element such as made-up articles, leather products, wooden items, etc.
• Do not use the tank for cleaning any non-waterproof object that might be damaged during use.
• Do not use the tank for cleaning mobile telephones, non-waterproof watches or handicraft items made from seashells,
oyster shells or similar materials.
FEATURES
• Digitally programmable: 5 different operating cycles to choose from
• Stainless-steel tank
• Tank capacity: 600 ml
• Ultrasonic frequency: 42,000 Hz
• 2 accessories: jewellery basket and watch holder
FUNCTIONS
The ultrasonic cleaner can clean the following objects:
Miscellaneous products: Dentures, electric shaver heads, razor blades, combs, toothbrushes, etc.
Jewellery: Necklaces, rings, earrings, bracelets, etc.
Glasses and watches: Spectacles, sunglasses, watch chains, waterproof watches, etc.
Stationery items: Ballpoint pen nibs, printer heads, stamps and seals, etc.
Metal objects: Watch parts, old coins, badges, valves, nozzles, etc.
Table objects: Metal plates and dishes.
OPERATING INSTRUCTIONS
1. Open the lid and fill the stainless-steel tank with water, but make sure the level does not rise above the "MAX"
marking.
Caution: Operating the cleaner without water might damage the unit.
2. Place the object to be cleaned in the water, ensuring that it is properly immersed.
Caution: Do not mix different types of metal, since this might affect the quality of the cleaning.
3.Close the lid and plug the appliance in.
4. Press the "SET" button to select the operating cycle: when the unit is switched on, it automatically displays the value
"180sec.". This is the most commonly used cleaning cycle. Each time you press the "SET" button, the 5 optional cleaning
cycles (180s; 280s; 380s; 480s; 90s) are displayed successively on the screen. You can choose the most appropriate cycle
according to the dimensions and condition of the object to be cleaned.
5. Press the "ON" button to begin the cleaning cycle, and the red warning light will come on. The remaining time will be
displayed on the screen. It is normal to hear a slight noise during cleaning.
4