Polk Audio n1 surroundbar Manual De Instrucciones página 5

1 2
Controls
1. Power ( )—Turns on the bar or puts
it in standby mode.
LED—Blue, green or red light to indicate
operating status.
2. Learn—Puts the bar into "learning mode" so
you can program it to respond to commands
from your TV's IR remote control.
3. Source—Changes which input source
you are listening to.
Source 1: optical (Blue LED for PCM
or Green for Dolby Digital)
Source 2: coaxial (Blue LED for PCM
or Green for Dolby Digital)
Source 3: analog
): Blue light indicates Bluetooth
4. Bluetooth (
Source has been selected.
5. Mute—Mutes the sound coming from the
N1 SurroundBar and the subwoofer output.
6. Volume Up and Down ( – / + )—Adjusts
the volume of the N1 SurroundBar and
the subwoofer output.
7. Power Connection—The bar power supply
connects here.
8. SUB Out—Connect optional subwoofer.
9. Audio Inputs (Source 1, 2, or 3)—Where
you connect your TV, Xbox 360 or Xbox One
(or other source) to the N1 SurroundBar. Use
the provided 6' optical cable (Source 1), digital
coaxial audio cable (Source 2) not included,
or 1/8" analog cable (Source 3) not included.
Polk Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
6
3 4 5
7
6
20V
60W
Power LED
Normal Mode:
Green or Blue Steady—Power is on;
all is well in Source 1.
Red Steady—The bar is in standby mode.
Learning Mode:
Red Blinking—The bar has failed to learn
a remote control command.
Power LED Blinks Red Twice—Learned
IR codes have been successfully erased.
Learn LED
Learning Mode:
Blue Flashing—The bar is in learning mode.
Blue Solid—The bar is in learning mode
and a bar button has been selected.
Bar Button LED—Flashes blue. When
learning is successful, both the LEARN
LED and the bar command button
LED flash.
8 9
3A SOURCE
3 2
SUB OUT
1