General Notes - Nordcap V5 Manual De Montaje

1. Reception:
On receiving the equipment, check carefully that the packaging is intact and has not been damaged in transit.
After unpacking, check that you have all the components and if the characteristics correspond to those on the order form.
Installation, maintenance and other work should be carried out by specialised and authorised technicians. The manufacturer accepts
no responsibility and will not cover the guarantee if these conditions are not respected.
This appliance must be used according to these instructions and only for the manufacturer's purpose. The incorrect use of the equipment can
cause damages to the equipment and to users.
As a result of our constant effort to make technological improvements, the specifications indicated here are subject to change without warning.
2 – Identification:
Our models have a plate behind the control panel on which the main data can be found. The MODEL and SERIES / YEAR are absolutely
essential when consulting the manufacturer.
MODELO 1
2
CÓDIGO
Legend:
1 - Model
2 - Code
3 – Recommendations for Installation:
3.1 – General Notes:
Although the production of each appliance is rigorously controlled during manufacture, this does not exclude the possibility of damage caused in
transit. The general condition of the appliance should therefore be checked on arrival.
3.2 - Placing:
•
Remove the packaging or pallet carefully so that the equipment's surfaces are not damaged. Remove the PVC protection.
•
The appliance should be installed away from heat sources (ex: heating appliances) and direct sunlight.
•
To ensure that the appliance functions well, it should always be correctly levelled and slightly inclined to the back, to make sure
that the doors close perfectly. Small differences in level can be compensated for by regulating the feet.
3.3 - Installation
The following standards should always be bared in mind during installation:
•
Regulations concerning the buildings, and anti-fire standards.
•
Rules concerning accident prevention.
•
European standards into effect.
4 - Recommendations for the User
The boxes have been designed for cooling waste. To ensure that they function well, the following points must be followed:
•
Avoid opening the doors as much as possible.
•
When putting in the waste, make sure that there is good natural circulation of air inside.
•
Do not use pointed objects to remove
•
If you do not follow the advises above, there will be an increase usage of electrical energy.
4.1 - Cleaning:
To ensure perfect hygiene and conservation, clean as follows:
•
Cleaning the surfaces frequently and carefully with a damp cloth.
•
Always when using water and detergent, make sure these are neutral, and avoiding those which are chlorine-based or abrasive.
MANUAL INST V5
TEC
Assembly Instructions
N.º SÉRIE/ ANO 3
MADE IN PORTUGAL
3 - Series Number
N.º
MANUAL
INST V5
14/62