AGV COMPACT ST Instrucciones Del Propietario página 25

2
Starting from one side of the helmet, exert light inward pres-
3
sure at the side of the sun visor and remove the fastening
connection (2). Repeat the operation on the other side and
remove the sun visor.
NB: After removing one side, do not pull or force the sun
visor in any direction other than the horizontal direction
of the guide to remove it on the other side.
To install the sun visor, lower the sun visor lever and check
that the side guides are in the lowered position.
N.B. The left guide is operated with the lever located on
4
the outside of the helmet. The right guide can be lowered
manually (3).
Starting from one side of the helmet, with the visor fully rai-
sed, fit the sun visor connection into its side housing ma-
king sure that it rests against the side guides (4). Repeat the
operation on the other side. Check correct operation of the
sun visor.
6.3) Visor closing pins
Visor tooth
COMPACT ST has a system that allows the open visor to
be closed during opening of the chin guard. The system is
based on 2 metal pins attached to the respective visor teeth.
-
placing the standard visor, the metal pins must be purcha-
sed separately and attached to the visor tooth. The helmet
and visor will still operate perfectly without the metal pins
Visor stop pin
guard is raised will be disabled.
25