Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Paper Shredder
Operating Instructions
Installation
Operation
Maintenance
Troubleshooting
Warning
Service Center
Limited Warranty
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rate voltage may reduce capacity.
INSTALLATION
Mount the shredder securely to the rim of the waste basket. (FIGURE 1)
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
ATTENTION:
This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly
mounted on to the included wastebasket. Located on the back center of the shredder, next to the
power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE matching ridge of
the wastebasket. (FIGURE #1) THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY
MOUNTED AS PICTURED!
It is not designed to operate with any other wastebaskets. An activation switch located on the head unit
automatically shuts off the shredder when it is lifted or removed. The supplied wastebasket activates this
switch, which allows the shredder to be operable. Lining the wastebasket with a plastic bag will interfere
and may keep the shredder from functioning.
Caution: Micro-cut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
2
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Voltage
FIGURE 1
10 Sheets of 20lb. bond paper*
0.16 in. x 0.47 in. pieces
(0.4 cm x 1.2 cm pieces)
8.7 in / 22.0 cm
--
1 at a time
120V~60Hz / 3.5 A
Tabla de contenido
