Programming Tracks; Repeat/Random/Intro Play (P-Mode) - Naxa NPB-262 Manual De Instrucciones

To select a desired folder (for MP3 discs,
only)
To select a track in a folder, press and hold the DIR/
MEM/10+ [4] button each time to skip forward a folder,
then press the NEXT [13] to select desired track.

Programming Tracks

You can create a custom play list from your disc when
playback is stopped. You can program up to 20 tracks
for a CD disc and 99 tracks for an MP3 disc
1. While play is stopped, press the PROG/P-MODE
button [6]. The display will flash PROG and show
"P01".
2. Use the NEXT [13]/PREV [19] buttons to select the
first track to be saved to the program list, then
press the PROG/P-MODE button [6] to save. The
display will now show the next program number
(e.g., "P02").
3. Repeat step 2 to save more tracks to the program
list until all tracks have been programmed.
4. Press the PLAY/PAUSE/PAIR button [14] to start
Page 12
playing the program list from the beginning. The
display will show which track is currently playing.
5. Press the STOP button [22] on unit to stop program
playback. To clear the program, open the CD com-
partment lid, making sure that the disc has stopped
spinning completely before you do so.

Repeat/Random/Intro Play (P-mode)

To change the playback mode, press the PROG/P-
MODE button [6] during playback; the display will show
the current P-MODE. Modes include repeat, random,
and intro.
Repeat the current track
Repeat all of the tracks in the current directory/
DIR:
folder (MP3 playback only).
Repeat all tracks.
ALL:
RAN: Play tracks in random order.
INTRO Play the first 10 seconds of each track.
Naxa Electronics