Manual Preset Memory; Cd Mode (Cd And Mp3 Discs); Supported Disc Formats; Loading A Disc - Naxa NPB-262 Manual De Instrucciones

Manual Preset Memory

Choose which stations to save in preset memory in-
stead of scanning automatically.
1. Turn the TUNING dial [21] to tune to the station
that you want to save as a preset (e.g., 93.10).
2. Press the PROG/P-MODE button [6]. "P01" will
flash on the display to indicate that you are sav-
ing the station as Preset Memory 01. (To change the
preset memory number, press the DIR/MEM/10+
[4] or DIR/MEM/10– [5] buttons.)
3. Press the PROG/P-MODE button [6] to finish saving
the station (e.g., P01 is now set to 93.10).
4. To save another station, repeat steps 1 to 3. You
may save up to 30 FM stations and 10 AM stations.
Page 10
CD Mode (CD and MP3
Discs)
Play CDs with audio or MP3 files. Press the FUNCTION
button [27] to select "CD" mode.

Supported Disc Formats

This unit can play all digital audio CD/MP3, finalized
digital audio CD-Recordable (CD-R) discs, finalized
digital audio CD-Rewritable (CD-RW) discs, and CD-DA
formatted digital audio CD/CD-R/CD-RW discs.

Loading a Disc

1. Press PUSH TO OPEN on the CD door to open it; the
display [1] will read "OPEN".
2. Place the compact disc into the tray with the label
side facing up.
3. Close the CD door; the display will flash "TOC READ",
and then show the total number of playable tracks
on the disc. Playback will start automatically.
Naxa Electronics