Before Use - essentiel b ERA 553 Manual De Utilización

beforeuse
Assemblingthewheels
WARNING: Please completely assemble the air
cooler before switching it on.
Insert the two front wheels (with an extra tab) into the front supports and the two rear wheels
into the rear supports underneath the unit.
Fillingthewatertank
To activate the "Cool Air"
Please follow these steps:
Make sure that the unit has been turned off and unplugged from the power point for at
1.
least 3 minutes.
Press the tab on the tank to release it, and then remove it from its housing.
2.
Insert the two ice packs that you have taken out of the freezer into the tank. This will
3.
produce even cooler air.
Fill the water tank with cold tap water, making sure that the water level is between the MIN
4.
and MAX marks on the tank.
Put the tank in back its housing and make sure it is properly positioned to prevent any risk
5.
of leakage. Also make sure that the tank's filter is in its housing.
Please note: the "Cool Air"
tank is empty and the "Cool Air"
lamp for the "Cool Air"
disabled.
30
V.4.0
beforeuse
function, you have to fill the air cooler's tank (7).
function cannot operate without water. When the water
function is activated, the unit beeps and the indicator
button flashes on the control panel. The function is automatically
Front wheel (x 2)
Rear wheel (x 2)