Tabla De Contenido; Table Of Contents; Warnings - KNOVA KN CM-20W3 Manual Del Usuario

INDEX
Table of contents ................................................................ 1
Warnings ............................................................................. 1
Features .............................................................................. 2
Specifications ..................................................................... 2
Receiving ............................................................................ 2
Installation and Assembly ................................................... 3
Electrical connections ........................................................ 4
Adjustments ........................................................................ 4
Maintenance ....................................................................... 9
Troubleshooting: Operating problems ................................ 11
Troubleshooting: Mechanical and electrical problems ........ 11
Planer headstock parts list ................................................ 13

WARNINGS

WARNING
Read the manual. Always read the owner's manual
carefully before attempting to use the machine. Know the
limitations and hazards associated with the use of this planer.
Installation. If mounting machine to the floor, use high quality
anchor bolts through the mounting holes on the base. If using
a mobile base, be sure to lock the wheels.
Eye protection. Always wear approved safety goggles,
glasses, or a face shield when operating this machine. NOTE:
Common eyeglasses are only impact resistant, they are not
safety glasses. Also use face or dust mask if the cutting
operation is dusty.
Dress code. Do not wear loose clothing, neckties, jewelry, or
gloves that can get caught in moving parts. Confine long hair.
Keep sleeves above the elbow.
Placement. Place machine so that potential kickback area is
not in line with aisles, doorways, wash stations or other work
areas. Do not use machine in a damp or wet location, or
expose to rain. Keep work area well lighted.
Electrical grounding. Your machine must be electrically
grounded. If a cord and plug are used, make certain the
grounding lug connects to a suitable ground. Follow the
grounding procedure indicated by the National Electrical
Code.
Guards. Be sure machine guards are in place and in good
working order. Do not operate while gear cover is open. If a
guard must be removed for adjustments or maintenance, it
should be reinstalled immediately upon completion of the
procedure and before operating the machine.
Housekeeping. Before turning on machine, remove all extra
equipment such as keys, wrenches, scrap, stock, and cleaning
rags from the machine. Keep the area around machine clean
and free of scrap material and sawdust to minimize the
danger of slipping.
Power off. Make sure the machine is either unplugged or
electrically disconnected and locked out when performing
maintenance or service work. Also, make sure switch is in
OFF position before plugging in power cord. Never leave the
machine running unattended. Do not leave machine until it
comes to a complete stop.
Diagram planer headstock ................................................. 14
Planer table parts list ........................................................ 15
Diagram planer table ......................................................... 15
Planer base parts list ......................................................... 16
Diagram planer base .......................................................... 16
Planer gearbox parts list .................................................... 17
Diagram planer gearbox .................................................... 17
Planer feed gearing parts list ............................................ 18
Diagram planer feed gearing ............................................. 18
Planer cabinet parts list .................................................... 19
Diagram planer cabinet .................................................... 20
Notes ................................................................................ 21
Cutterhead. Keep knives sharp and free of all rust and pitch.
Make sure gib screws are tightened securely.
Work piece. Check material for loose knots, nails and other
defects that can damage knives and pose a safety hazard for
the operator.
Keep hands away from feed rollers and cutterhead while
operating.
Use the proper extension cord. Make sure your extension
cord is in good condition. When using an extension cord, be
sure to use one heavy enough to carry the current your
product will draw. An undersize cord will cause a drop in line
voltage resulting in loss of power and overheating. For runs
up to 25 feet, use an 18 AWG or larger gauge cord.
Do not operate this machine while under the influence
of drugs, alcohol or any medication.
If you are not thoroughly familiar with the operation of wood
planers, obtain advice from your supervisor, instructor or
other qualified person.
Health hazards. Some dust created by power sanding,
sawing, grinding, drilling and other construction activities
contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paint.
• Crystalline silica from bricks and cement and other
masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals, work in a well-ventilated area, and work with
approved safety equipment, such as those dust masks that
are specifically designed to filter out microscopic particles.
1