KTM Power Parts 62014949000 Manual Del Usuario página 7

14
1
1
15
A
1
- Remove the screws (14) of the lamp mask and fold the lamp mask for-
ward.
14
Assembly
- Detach the plug-in connection of the speed signal (coming from the front
wheel).
- Connect the adapter cable (3) (included) in between.
2
NOTE:
3
For 690 SMC & Enduro, use adapter cable (2) (included).
- Route the cable (1) (included) forward and connect with adapter cable (3)
or (2).
1
- Detach the plug-in connection of the tail light (15) (3-pin).
- Connect the wiring harness of the ESS electronics (4) (included) in between.
- Connect the wiring harness of the ESS electronics (4) with the wiring har-
ness (1) (included).
- Depending on the model, connect the appropriate encoding connector (A)
(included) to the wiring harness of the ESS electronics.
4
5 LC4, 990SM, RC8
990SuperDuke
6 990Adventure (without ABS)
7 990Adventure (with ABS)
7
White
Black
Blue