Operations; Assembling The Squeezing Set - Fitin Juice SJW-ACNB Instrucciones De Uso

ENGLISH

Operations

Assembling the squeezing set

Performing the steps indicated by this symbol is required
for proper operation of your juice extractor.
1) check that the rubber seal cap (12) located under the
extraction bowl and held by a screw (and pointed to by black
arrows on the diagrams below, showing the extraction bowl
from underside), closes the slot.
2) Mount the extraction bowl (5) on the body of the extractor (6)
by pushing it downwards while it is properly aligned with the
three pins (18) of the body. Then, rotate the extraction bowl
to the left, a few millimetres, until it fits into the notches of
the pins and meets the stops.
FitinJuice ©
Seal cap (12)
2
2
ENGLISH
Pin (18)
7