Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation Instructions
Model 130 - Single fan w/ thermo-
Pusher
Model 140 - Single fan w/o ther-
Pusher
Through Core Mounting Instructions
(SEE DIAGRAM "A")
1.Position the electric fan against the front of the
radiator, and mark location of the holes on radiator.(Some
applications may have A/C condensers and/or tranny
coolers on the front of the radiator. Additional adjust-
ments or modifications may be necessary for installation)
2. Holding fan in position, rotate fan blades to make sure
they are free of obstructions.
3. With a small Phillips screwdriver pass through the
marked holes, carefully spread the fins to allow easy pas-
sage for the nylon bolts (4 for the single fan unit, 6 for the
double fan unit). Pass the bolts through the shroud holes
then twist the bolts through the radiator.
pass through the motor lead connectors when inserting the
bolt through the top middle hole of the double unit. See
expanded view on diagram B.
4. Slide the rubber washer, then the steel washer onto the nylon bolt and
finger tighten wing nuts until snug.
5. Once again, rotate fan blades to insure that they are free of obstruction.
OR
Radiator Support Channel Or Frame Installation
(SEE DIAGRAM "B")
1. Attach frame mounting brackets to fan using
nylon bolts, cut them to 1", using wing nuts to
secure.
Note: Be sure to pass through the motor lead
connectors when inserting the bolt through the top
middle hole of the double unit. See expanded view
on diagram B.
2. Position fan to desired location, mark holes on
radiator channels or frame.
3. Rotate fan blades to insure that they are free of
obstruction.
4. On the marked hole locations drill 13/64" holes.
5. Secure the fan to radiator using the provided
1/4" x 1" self tapping screws.
6. Once again, rotate fan blades to insure that they
are free of obstruction.
static control &
A/C relay
mostatic control &
A/C relay
Note: Be sure to
130&140 230&240
Pusher Fans
Model 230 - Dual fan w/ thermo-
Pusher
Model 240 - Dual fan w/o ther-
Pusher
Wing Nut
Steel Washer
Black Nylon
Clamps
Motor Leads
(See circled areas for location of
installed clamp. Wire holders
shown in inset.)
Page 1 of 6
static control & A/C
relay
mostatic control &
A/C relay
Diagram A
Rubber Disk Spacer
Nylon Bolt
Diagram B
Self Tapping
Screw
Frame
Mounting
Brackets
Nylon Bolt
(cut to 1")
Manuales relacionados para Flex-a-Lite 130
Resumen de contenidos para Flex-a-Lite 130
- Página 1 130&140 230&240 Pusher Fans Installation Instructions Model 130 - Single fan w/ thermo- Model 230 - Dual fan w/ thermo- Pusher static control & Pusher static control & A/C A/C relay relay Model 140 - Single fan w/o ther- Model 240 - Dual fan w/o ther- mostatic control &...
-
Página 2: Wiring Instructions
Flex-a-lite Corporation, 7213-45th Street Court East, Fife, Washington 98424, Telephone No. 253/922-2700, warrants to the original purchaser user, all Flex-a-lite products to be free of defects in material and workmanship for a period of 365 days (1 year) from date of purchase. Flex-a- lite products failing within 365 days (1 year) from date of purchase, may be returned to the factory through the point of purchase, transporta- tion charges prepaid. - Página 3 Instructions ’installation -Ventilateur Double Modèle propulsif 130 Modèle propulsif 230- unique avec contrôle à thermostat ventilateur avec contrôle à et relais de climatisation thermostat et relais de climatisation -Ventilateur Modèle propulsif 140 unique avec contrôle à thermostat Double Modèle propulsif 240- et relais de climatisation ventilateur avec contrôle à...
- Página 4 Cette garantie est valable pendant 365 jours (1 an) suivant la date d’achat. Si, dans les 365 jours (1 an) suivant la date d’achat, des produits Flex-a-lite se révèlent défectueux, vous pouvez les réexpédier à l’usine, frais d’expédition prépayés. Si l’inspection détermine que la cause de la panne est due à un défaut de matériau ou de fabrication, et non à...
- Página 5 Instrucciones de instalación Modelo 130 de empuje - Modelo 230 de empuje - Ventilador simple con control Ventilador doble con control termostático y relé de aire termostático y relé de aire acondicionado. acondicionado. Modelo 140 de empuje- Modelo 240 de empuje -...
-
Página 6: Instrucciones De Cableado Para Accesorios
Flex-a-lite Corporation, 7213-45th Street Court East, Fife, Washington 98424, teléfono número 253-922-2700, le garantiza al usuario comprador original, que todos los productos de Flex-a-lite estarán libres de toda clase de defectos de materiales y mano de obra durante un periodo de 365 días (1 año) a partir de la fecha de compra. Los productos de Flex-a-lite que fallen dentro de los 365 días siguientes (1 año) a la fecha de compra, podrán regresarse a la fábrica, con los cargos de transporte pagados por adelantado.