Jxp Plug-In Modules; Jmp/Sti /Tsi Plug-In Modules - ITS EKSELANS AC 129 TR Manual De Usuario

Referenc
Code
JMP/1
102008
STI-3,5
102009
TSI 1/9
102010
JXP 0
102011
JXP 3
102013
JXP 6
201014
JXP 9
102015
JXP 12
102016

11.1. JXP plug-in modules

In order to reach the required levels of gain and tilt, both in
the forward and reverse paths, it is necessary to use the
modules. Its range is from 0 to 20 dB

11.2. JMP/STI /TSI plug-in modules

In order to close the circuit, it is mandatory to install JMP,
•
JMP/1  Lets the signal pass only to OUT1. OUT2 remains open circuit.
•
STI-3.5  Splits the signal equally into both outputs OUT1 and OUT2.
•
TSI 1/9  Splits the signal non equally into both outputs OUT1 and OUT2. Offers 1dB
attenuation at OUT1 and 9dB at OUT2.
Description
DIrect pass of signal
Splitter (-3,5/-3,5dB)
TAP (-1/-9dB)
Attenuator 0dB
Attenuator 3dB
Attenuator 6dB
Attenuator 9dB
Attenuator 12dB
Use
Ouptut
Output
Output
Attenuation / equalization adjustment
Attenuation / equalization adjustment
Attenuation / equalization adjustment
Attenuation / equalization adjustment
Attenuation / equalization adjustment
JXP
STI or TSI modules:
19