Securing the Child
1) Make sure booster seat is properly positioned and installed on vehicle seat as per
the instructions in pages 12–13.
2) Properly position child: sitting upright and all the way back
in the booster seat.
3) Make sure booster seat backrest width is adjusted to narrowest
width setting that comfortably fits child (see page 11).
4) Raise the headrest to access upper belt guides.
diagonal portion of the seatbelt through the guide on the
side opposite the seatbelt buckle.
5) Fasten seatbelt across child: Lap portion of seatbelt should
rest within both lower belt guides. Diagonal shoulder
portion should route inside the lower belt guide closest to
the buckle and over
child's shoulder.
6) Adjust headrest (page 11)
to proper height: Upper
shoulder guide should be
slightly above (at least 1
cm) the child's shoulders.
WARNING: If headrest is adjusted to maximum height and child's shoulder
height is closer than 1 cm to the upper belt guide, child is too tall and the seat
can only be used a backless booster.
A
Feed the
14