Brother P-touch 580 C Guia Del Usuario página 125

ERROR MESSAGE
CUT NOW
EJECT CUT TAPE &
PRESS RETURN
ERROR!
ERROR! UL/FRM
FIXED SIZE!
INPUT ABCD AT
BEING & END
INPUT WHOLE CODE
CAUSE
•This message appears after
a label has been printed with
the Cut pause mode on or
before multi-color printing if
the end of the tape is incorrectly
positioned.
•This message appears when
the tape has been cut, but it
not removed.
•This message appears if you
try printing in Interface mode
without installing the correct
tape cassette.
•A maximum of 25 characters
can be underlined or framed.
This message appears if you
try to underline or frame more
then 25 characters.
•This message appears if the
RETURN key is pressed when
a TITLE font is selected.
•This message appears if a 1/4"
(6-mm)- or 3/8" (9-mm)- wide
tape is installed when text is
entered using a TITLE font.
•This message appears if the
character size is changed when
a TITLE font is selected.
•This message appears when
the CODABAR protocol is used
in Bar code mode, but a letter
between A and B has not been
entered at the beginning and end
of the bar code.
•In Bar code mode, the number
of digits required for a code can
sometimes be set.
This message appears if the set
number of digits are not entered
while inputting the bar code data.
REMEDY
•Press the tape cutter lever to
cut the tape.
•Remove the cut excess tape
and press RETURN key.
•Press any key other then tape
CODE, SHIFT, ALT or CAPS
keys, then install the correct
tape cassette.
•Reduce the number of char-
acters that are underlined or
framed.
•Change the font.
•Insert a tape cassette that is
wide enough for TITLE font
text to be printed on it.
•Since the size is fixed, do not
change it.
•Enter a letter between A and
D at the beginning and end
of the bar code.
•Input the correct number of
digits or change the number
of digits set in the bar code
parameters.
121