Tabla de contenido
Idiomas disponibles
Idiomas disponibles
!
NOTE: There is a 3 second delay between pressing the last button
on the controller and the RCH.
!
NOTE: To desynchronize a RCH from the synchronized CON-
NEX
Controller; on either the RCH or the controller:
TM
1. Press and hold the V for 3 seconds.
2. Press the V, ✚ and then –.
Nothing will need to be done to the other component.
The Dimplex multi-zone CONNEX
is available for purchase from your authorized Dimplex dealer.
To find your local Dimplex dealer, visit www.dimplex.com.
F. Lock Icon
The RCH has a Lock feature to prevent settings from accidentally
being changed.
1.
Press and hold the V for 3 seconds. Both the
will begin to flash.
2.
To Enable: Within 5 seconds press ✚, then –, then ✚, then –.
The
icon will appear
To Disable: Within 5 seconds press –, then ✚, then –, then ✚.
The
icon will disappear.
!
NOTE: The RCH can be locked in either the Comfort or Economy
Setting. Ensure that the desired icons are present when locking is
complete.
Maintenance Instructions
WARNING: Always disconnect power at the circuit breaker to the
unit prior to performing any maintenance or service operation.
CAUTION: Allow adequate time for the element and body casing
to cool before attempting to work on the heater.
It is suggested that the heater be inspected regularly, for cleanliness
of the fan intake and exhaust grilles, to ensure optimal performance
is maintained. The grilles can be cleaned either by vacuuming off
all dust and dirt or, washing the grille box in warm, soapy water and
allowing to dry thoroughly before reinstalling. Once cleaning is com-
plete replace the grille and restore power.
WARNING: TO PREVENT THE RISK OF FIRE OR INJURY, DO
NOT OPERATE THE HEATER UNLESS IT IS FULLY ASSEM-
BLED.
At least at yearly intervals the wire connection condition should be
inspected to ensure full electrical continuity and optimal performance
is maintained.
WARNING: The user can perform cleaning ONLY. All other servic-
ing should be performed by qualified service personnel.
1367 Industrial Road
Cambridge ON Canada N4H 4W3
1-888-346-7539
www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2016 Dimplex North America Limited
controller is sold separately and
TM
and
Warranty
The Manufacturer warrants the RCH series ceiling heaters and com-
ponents of the enclosed product against any defect in material or
workmanship for a period of one year from the date of purchase. In
full satisfaction of any claims under this Warranty the Manufacturer
will repair or replace without charge, in its factory or in the field as it
alone may decide, any parts which in its opinion are defective.
The Manufacturer shall not be responsible for any transportation or
shipping costs in relation to such repair or replacement except as
specifically assumed by it. Misuse of this product or repairs by per-
sons other than the Manufacturer's authorized personnel without the
Manufacturer's written approval, will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether
express or implied including but not limited to those of merchant-
ability or fitness for purpose and shall constitute the sole remedy of
the Purchaser and the sole liability of the Manufacturer in respect of
Icons
the sale of the product, whether in the nature of breach or breach of
fundamental term, or of negligence or otherwise.
The Manufacturer shall not be liable for any special, indirect or con-
sequential damages or for any damages resulting from removal or
replacement of a heater subject to warranty claim without the Manu-
facturer's authorization.
This Warranty is transferable by the original consumer purchaser
of the product. Any claims under this Warranty must be submitted
in writing to the Service Manager, Dimplex North America Ltd., 1367
Industrial Rd., Cambridge, Ontario N4H 4W3, Canada.
Replacement Parts
Cutout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCH-CUTOUT-RP
Fan Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCH-FAN-RP
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCH-MOTOR-RP
Housing Cover . . . . . . . . . . . . . . . . . . . . . . . . . RCH-COVER-CX-RP
Display Board . . . . . . . . . . . . . . . . . . . . . . . CMH-DISPLAYPCB-RP
Power Board . . . . . . . . . . . . . . . . . . . . . . . . . RCH-POWERPCB-RP
Control Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCH-3FNTCRP
CONNEX
Controllers
TM
Single Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . DPCRWS
Multi-zone Controller . . . . . . . . . . . . . . . . . . . . . . . . . .CX-MPC
Tabla de contenido
