Idiomas disponibles
Idiomas disponibles
Chevrolet Cavalier
1991-1994
1. Using a panel removal tool, carefully pry out on the
dash trim bezel and remove. (Figure A)
2. Remove (2) screws securing the factory radio and
disconnect the wiring.
3. Cut and remove all mounting tabs on Bracket #3
EXCEPT tabs "B". (Figure B)
Note: Identify mounting tabs by the stamped letter
on the back of each tab.
Continue to kit assembly
"B"
(Figure A)
(Figure B)
Dash Disassembly 99-4544
1. Open drivers door and remove fuse panel on end of
dash then open passenger door and remove panel
on end of dash.
2. Remove (1) Phillips screw from each side,
now exposed.
3. Remove (3) 7mm hex-head screws
from the top of the glove box liner.
4. Remove (2) 7mm hex-head screws
from the top-left corner of the glove
box cavity.
"B"
(Figure A)
Chevrolet Cavalier 1995-1999
5. Remove (1) Phillips screw from the defroster duct.
6. Remove the duct work and (1) Phillips
7. Remove the dash pad and (3) Phillips screws
8. Locate Bracket Set #10. (Figure B)
(Figure B)
14
screw exposed.
exposed at the top of the radio trim bezel.
(Figure A)
Continue to kit assembly
Capítulos
