Idiomas disponibles
Idiomas disponibles
Chevrolet Citation II
1985
1. Remove (2) screws from the bottom steering
column trim panel and remove. (Figure A)
2. Remove (6) screws from the dash trim bezel,
disconnect the wiring and remove. (Figure A)
3. Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S-10 application
shown as example)
(Figure A)
(Figure B)
Dash Disassembly 99-4544
Chevrolet Corvette
1984-1989
1. Remove (7) screws from the dash trim bezel.
(Figure A)
2. Move the gear shifter to the lowest position.
3. Pull the right edge of the bezel forward, unhook the
left side and remove.
4. Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
5. Remove and retain the brackets.
Continue to kit assembly
(S-10 application
shown as example)
(Figure A)
(Figure B)
16
Chevrolet Corvette
1997-2004
1. Pry out on the ride control switch and disconnect
the wiring.
2. Unsnap the switch trim and remove (2) 10mm hex-
head bolts exposed.
3. Open the center console door, remove (4) screws
from the inner hinge and remove the door.
4. Open the ashtray and remove (1) screw exposed.
Remove the ashtray and (1) screw exposed.
5. Unclip the small grille to the left of the ignition
switch and remove (1) screw exposed.
6. Unclip the base of the radio trim bezel and remove.
(Figure A)
7. Locate Bracket Set #10. (Figure B)
Continue to kit assembly
(Figure A)
(Figure B)
Capítulos
