Setup Menu Setting - Lenco DVP-7301 Manual Del Usuario

SETUP Menu Setting

General Setup Page
Press SETUP button to get the setup menu. Use direction buttons
to select the preferred item. After finishing settings, press
SETUP again to normal display.
The following menu items can be changed:
GENERAL: selects the GENERAL PAGE menu.
AUDIO: selects the AUDIO PAGE menu.
VIDEO: selects the VIDEO PAGE menu.
PREFERENCE : selects the PREFERENCE PAGE menu.
PASSWORD: selects the PASSWORD PAGE menu.
General Setup Page
TV DISPLAY: selects the aspect ratio of the playback picture.
4:3 PANSCAN: if you have a normal TV and want both sides of the
picture to be trimmed or formatted to fit your TV screen.
4:3 LETTERBOX: if you have a normal TV. In this case, a wide picture
with black bands on the upper and lower portions of the TV screen will
be displayed.
16:9:wide screen display.
TFT DISPLAY: Selects the TFT display to 16:9 or 4:3.
Angle Mark
Displays current angle setting information on the right hand corner
of the TFT screen if available on the disc.
OSD Language
You can select your own preferred language seetings.
Closed Captions
Closed captions are data that are hidden in the video signal of some
discs.Before you select this function,please ensure that the disc
contains closed captions information and your TV set also has this
function.
Screen Saver
This function is used to turn the screen saver On or Off.
Audio Setup Page
Audio Setup Page
-- --
- - - -
AUDIO SETUP PAGE
DOWNMINX STR
DIGITAL OUTPUT RAW
DOLBY DIGITAL
DUAL MONO
DYNAMIC
- -
- -
- -
- -
-
-
GO TO AUDIO SETUP PAGE
6
LT/RT
SPDIF/OFF
STEREO
SPDIF/RAW
STR STR
SPDIF/PCM
L-MONO
- - R-MONO
FULL
MIX-MONO
- -
- -
- -
-
OFF