Digitus Plug&View Guía De Instalación Rápida página 7

3. Add Plug&view IP camera
1.3 With the Smartphone/tablet
In the Plug&View App menu, select
"Add Camera", in order to register
your camera. This is easily done by
scanning the QR-code with your
smartphone/tablet or through manual
entry of the activation data.
The following devices are suitable for scanning of the QR-code:
®
Apple iPhone
(with integrated rear camera).
The MAC-address, the activation code, and the QR-code can be
found on the last page of this guide.
Note: The Android version of the mobile device should be at least
2.3.5 or higher.
You will be notified that your camera needs to be connected to your
router via a network cable.
Adding the camera by scanning the QR-Codes
Plug&View IP camera ‫ ׀‬QIG Rev. 2-0 ‫ ׀‬ML-201405
®
, Apple iPad , Android-Smartphone, Android-tablet
Please select the option "Scan QR
Code" on the next page. The QR
code scan function of your mobile
device is activated.
Should there already be one or more
apps for the scanning of QR codes
installed on your device, you will be
presented with a pop-up selection.
7