Sunstech PXR4CDWD Manual De Instrucciones página 4

Waste Disposal
Instructions for waste disposal:
- Packaging and packaging aids are recyclable and should principally be recycled.
Packaging materials, such as a plastic bag, must be kept away from children.
- Batteries, including those which are heavy metal-free, should not be disposed of with
household waste. Please dispose of used batteries in an environmentally friendly manner.
Find out about the legal regulations which apply in your area- Do not try to recharge batteries,
can have a danger of explosion. Replace batteries only with the same or equivalent type.
This symbol on the product or on its packaging means that your electrical device should be
disposed at the end of its service life, separately from your household wastes. There are
separate collection systems for recycling in the EU. For more information, please contact the
local authority or the dealer where you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect the device from the mains and therefore it must remain
readily operable.
Headphone Volume
Do not leave your device in standby or operating mode when you leave your house.
emergency the mains plug can be pulled immediately. During periods of prolonged
non-use, the device should be disconnected from the mains power supply.
Symbol for equipment
In your device has headphones jack, please note that excessive sound
pressure from earphones and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely attached to the wall in
accordance with the installation instructions when mounted to the
wall (if the option is available).
Warning:
The Standby / On button does not fully switch off this
product. Moreover the device continues to consume
power in standby mode. In order to separate the device
completely from mains, the mains plug has to be pulled
from the mains socket. Because of that the device
should be set up in a way, that an unobstructed access to
the mains socket is guaranteed, so that in case of
EN-3
Symbol for
batteries