Stainless Steel Surfaces; Light Bulbs - GE CV48S Manual Del Propietario E Instalación

Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always wipe
the surface in the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel surface.

Light Bulbs

To change the light bulbs:
1. Grasp the outer trim ring and twist until reaching the
unlock position. Then pull the ring straight out.
2. Grasp the bulb and twist until reaching the unlock
position. Then gently pull the bulb straight out.
3. Replace with the same wattage, type and size bulb.
Wear gloves. Do not touch bulb with your bare
fingers.
These 120 volt, 50 watt halogen bulbs with a GU10
base are available at specialty lighting stores and
home building centers.
Order bulb no. WB08X10052.
4. Replace the outer trim ring by inserting the two
retaining tabs into the two tab slots, pressing the ring
flush with the surface of the hood insert and twisting
until reaching the lock position.
49-80819
To inquire about purchasing stainless steel appliance
cleaner or polish, or to find the location of a dealer
nearest you, please call our toll-free number:
National Parts Center 1.800.626.2002
GEApplianceParts.com
7