Modecom MC-5020 Modo De Empleo página 5

5. INSTRUcTION MANUAL
) Sound sources
The default setting or input when powered on is stereo input mode. We suggest using ste-
reo input mode when connected to PC, TV or any stereo sound source. When connected
to any sound sources with DTS or Dolby Prologic we suggest using AC- input mode. Press
./5. input buttons-to transfer between the two modes.
) Volume control
The default setting for VOL+ and VOL- when powered on is master volume control. Adjust
the volume for each channel by pressing VOL MODE and then VOL+ and VOL-.
• Press MODE button for the first time and then adjust the volume of front speaker by pres-
sing VOL+ and VOL-.
• Press MODE for the second time and then adjust the volume of central speaker by pres-
sing VOL+ and VOL-.
• Press MODE for the third time and then adjust the volume of rear speaker by pressing
VOL+ and VOL-.
• Press MODE for the fourth time and then adjust the volume of subwoofer by pressing
VOL+ and VOL-.
• Press MODE for the fifth time and then adjust the master volume of all speakers pressing
VOL+ and VOL-. Then a new circulation begins.
6. REMOTE cONTROL - INSTRUcTION MANUAL
Illustration : Infrared Remote Control
) Press MUTE to enter silent mode
) Press ST-BY- the system will go into the hi-
bernation state
) Press AC-- AC- input setting.
4) These are buttons to adjust volume for
front, centre, rear and subwoofer spea-
kers.
5) Press ./5.l – switches between stereo
and AC- modes
6) These are buttons to adjust master volu-
me.
5