General Safety Warnings - Blaupunkt GT4000 Manual Del Usuario

EN

GENERAL SAFETY WARNINGS

WARNING! When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock
!
and personal injury. Also, please read and heed the advice given in the additional safety instructions.
1. Keep the workplace clean and tidy, cluttered work areas invite accidents and injury.
2. Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area
well lit. Do not expose power tools to rain or high humidity. Do not use power tools in the presence of flammable liquids or
gas.
3. Keep visitors away from the worksite. All visitor and onlookers, especially children and infirm persons should be kept well
away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.
4. Store tools safely. When not in use tools should be stored in a dry, high place or locked up out of the reach of children.
5. Do not force the tool. The tool will do the job better and more safely working at the rate for which it was designed.
6. Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavy duty tool.
Never use a tool for a purpose other than that for which it was intended.
7. Dress correctly. Do not wear loose clothing or jewelry, they can get caught in moving parts. Rubber gloves and non-slip
footwear are recommended when working outdoors. If you have long hair wear a protective hair covering
8. Use safety accessories. Safety glasses and ear protectors should always be worn. A face or dust mask is also required.
9. Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from
heat, oil and sharp edges.
10. Look after your tools. Keep tools clean for better and safer performance and follow the instructions regarding lubrication
and accessory changes. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and
free from oil and grease.
11. Disable idle tools. Switch off the power and disconnect the plug from the power before servicing, when changing accesso-
ries and when the tool is not in use.
12. Avoid unintentional starting. Always check that the switch is in the OFF position before plugging in the tool to the power
supply. Do not carry a plugged in tool with your finger on the switch.
13. Use outdoor rated extension cords. When a tool is used, use only extension cords that are intended for outdoor use and are
so marked.
14. Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired.
15. Check for damaged parts. Before using a tool, check that there are no damaged parts.
If a part is slightly damaged, carefully determine if it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of part's proper mounting and any other conditions that
may affect the operation of the tool. A guard or other part that is damaged should be properly repaired or replaced by an
authorised service facility unless otherwise indicated in this Instruction Manual. Defective switches must be replaced by an
authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly.
16. Guard against electric shock. Prevent body contact with grounded objects such as water pipes, radiators, cookers and
refrigerator enclosures.
17. Use only approved parts. When servicing use only identical replacement parts. Use an authorized service facility to fit
replacement parts.
18. Be aware of the harmful/toxic dusts arising from grass trimming etc, (e.g. fertilizers, insecticides).
19. The use of improper accessories or attachments other than recommended can lead to personal injury.
20. This electric tool is constructed in accordance with the relevant safety requirements, Only experts may repair the electric
tool. Otherwise, it may endanger your life.
21. Voltage — make sure power supply is correct for your machine. The voltage of this machine is on the rating plate.
Important : additional safety notes for your Grass Trimmer
22. During assembly take great care when fitting the guard as this has a very sharp cutting edge on one side for cutting the
nylon line.