TYROLIT Hydrostress FSD1274 Serie Instrucciones De Servicio página 43

7.7 Switch on motor
Floor Saw FSD1274
Symbol
Operating handle (2) engaged in 0 position
Coupling lever (1) is in the uncoupled position
EMERGENCY STOP switch (5) has been released
1. Turn ignition key (3) to the preheat position in order to preheat the motor.
2. Turn ignition key further to the right in order to start.
Battery and oil pressure displays light during starting and then go out.
3. With engine speed controller (4) set optimum blade speed.
Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
TYROLIT Hydrostress AG
Page 17