TYROLIT Hydrostress FSD1274 Serie Instrucciones De Servicio página 49

TYROLIT Hydrostress AG
8 Maintenance
8.1 Grease nipples
Position of grease nipples
1
2
3
Page 22
When?
Daily
Weekly
Every 50 hours of operation
Annually or every 100 operating hours
According to the information from the motor
manufacturer
Bearing lifting shaft
Cylinder eye
Bearing wheel drive
What?
► Check oil level.
► Perform a visual check for damage.
► Check belt tension and adjust if necessary.
► Lubricate grease nipples.
► Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
► Carry out all necessary measures in
accordance with the operating instructions of
the motor manufacturer.
Floor Saw FSD1274 / FSD1274 3-speed gearbox