Amann Girrbach af350 Instrucciones De Servicio página 11

!
warnIng anD SaFety
InStrUctIOnS:
A.S.M. products have been developed for use in
the dental industry. Start-up and operation must
be done according to the Instructions for Use.
The manufacturer cannot accept responsibility
for damages occurred in other uses or incorrect
handling. The user is furthermore obliged on his
own responsibility to test the apparatus, prior
to use, for its suitability and utilization in objec-
tives intended if these objectives are not
stated in the Instructions for Use.
_ the fixation screw for height adjustment
must always be in touch with the swivel
arm to prevent the arm from falling down.
_ when milling metal, plastic or wax wear
protection goggles.
_ persons with long hair should wear it tied
up or with a hairnet.
_ By using maximum heat with the block-out
there is a danger of burning the skin.
_ while cleaning or servicing the apparatus,
switch off the mains.
_ Do not steam clean and do not clean with
water or solvents.
_ repairs must be done only by authorized
persons.
Overload protection:
The motor is switched off automatically when
overloaded (e.g. seized by milling tool, open
clamp etc.). Red lamp shows overload.
reset:
_ R ectify the reason
_ S tart motor again with on-/off-switch
technical data:
L/B/H:
Weight:
Electrical connection:
Foot pedal connection: With plug connection
Block-out connection:
E-fuse:
Motor:
Performance:
Revolutions:
Clamping:
packing list:
Order No.:
177605
accessories/ Individual parts:
Order No.:
177998
(for the latest version see image on title page)
177995
177994
177800
177661
873001
*
Blockout Set 177990, Adjustable adapter cable AF350
177994, Marking stick 177800
340 x 250 x 450 mm
15 kg
100/115/230V, 50/60 Hz
on/off switch
24 V
T1A
1.500 to 40.000 rpm
125 W
7,5 Ncm
2,35 mm
AF350
incl. vertical adjustment
1 Milling arm,
incl. motor unit
1 Clamp Ø 2,35 mm
1 Modelling table MT3
Halogen lamp
1 Dust cover
Block out Upgrade Kit
AF350 adjustable* 3 parts
Upgrade kit AF350
4 parts
Adjustable adapter cable
Marker
W&H Chuck set
®
Milling Starter Kit
gB
11