Replacing The Fuse In The Car Adapter; Technical Data - Workzone BMWL1316 Manual Del Usuario

Replacing the fuse in the car adapter

Replacing the fuse in the car adapter
WARNING!
Fire hazard!
Bypassing a fuse can cause a fire.
− Never bypass a faulty fuse and only replace the fuse with an-
other fuse of the same type.
If charging via the car adapter
the power adapter
these instructions to replace it:
1. Unscrew the knurled ring on the car adapter by turning it counterclockwise.
2. Replace the defective fuse with a new fuse of the type F2AL250V (2 A, 250 V, fast).
3. Reinsert the coiled spring and screw the knurled ring with the metal cap clockwise
until tight.

Technical data

LED light
Model:
Article number:
Rechargeable battery type:
LED output:
Luminous flux:
Input voltage:
Protection class:
Power adapter
Model:
Input voltage:
Output power:
Protection class:
18
10 does not work but the lamp can be charged using
11 , the fuse built into the car adapter may be defective. Follow
BMWL1316
95652
Li-Ion, 2,000 mAh, 3.7 V DC
Top side: 1 W; front side: 3 W
LED top side: approx. 80 lm/
LED front side: approx. 250 lm
5 V DC
III
SYZY050500
110–240 V AC; 50–60 Hz; 0.2 A
5 V DC, max. 500 mA
II