ASROCK K7NF2-RAID Manual De Usuario página 12

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Connector
(9-pin USB67)
(see p.2 item 17)
Shared USB 2.0 Connector
(9-pin USB45)
(see p.2 item 28)
Infrared Module Connector
(5-pin IR1)
(see p.2 item 16)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2 item 26)
(AUX1: see p.2 item 25)
Front Panel Audio Connector
(9-pin AUDIO1)
(see p.2 item 21)
1 2 1 2 1 2 1 2 1 2
connect to the
power supply
CD1
AUX1
ASRock K7NF2-RAID Motherboard
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
TM
ASRock I/O Plus provides you
6 default USB 2.0 ports on the
rear panel. If the rear USB ports
are not sufficient, this USB 2.0
connector (USB67) is available
to support 2 additional USB 2.0
ports.
This USB45 connector is shared
with the USB 2.0 ports 4,5 on
the rear panel. When using the
front panel USB ports by
attaching the front panel USB
cable to this header (USB45),
the shared USB ports 4,5 on
the rear panel will not be able
to function.
This connector supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you to
receive stereo audio input from
sound sources such as a
CD-ROM, DVD-ROM, TV tuner
card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.