Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Trouble
Loss of power
Leaky Throttle Valve
Excessive runout
MAINTENANCE SECTION
TROUBLESHOOTING GUIDE
Probable Cause
Low air pressure
Clogged Power Regulator
Worn Throttle Valve
Worn Throttle Valve
Bent Arbor
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
Solution
Check the air supply. For top performance, the air
pressure must be 90 psig (6.2 bar/620 kPa) at the
inlet of the tool.
Clean the Power Regulator in a clean, suitable
cleaning solution. If it cannot be cleaned, replace
it.
Replace the Throttle Valve.
Install a new Throttle Valve.
Replace the Motor Assembly.
Tabla de contenido
