Installation Declaration - Leister MISTRAL Instrucciones De Funcionamiento

Installation declaration

(As defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Process Technologies, Galileostrasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that
the incomplete machine
Designation:
Type:
– insofar as is possible from the scope of supply – corresponds to the applicable fundamental requirements of the
EC Machinery (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We furthermore declare that the special technical documents pursuant to Appendix VII (Part B) have been com-
piled for this incomplete machine and that we are committed to communicate this electronically to the market
surveillance authorities upon justified request.
Name of the documentation officer: Patrick Rieder, Compliance Manager
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in which
the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive (2006/42).
Kaegiswil, 24.09.10
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose
of power tools in your household rubbish! According to the European Directive 2002/96 on waste elec-
trical and electronic equipment and its implementation in national law, power tools which can no
longer be used must be collected separately and recycled.
Hot Air Blower
MISTRAL System
Electromagnetic Compatibility 2004/108
Low Voltage Directive 2006/95
EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1,
EN 55014-1, EN 55014-2 EN 61000-6-2,
EN 61000-3-12, EN 61000-3-11 (Z
EN 60335-2-45
Bruno von Wyl
Technical Director
EN 50366, EN 62233,
),
max
Christiane Leister
Company Owner
11