Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
1. Lift water tank (p. 3, fig. A
hands.
2. NOTE: DO NOT hold water tank by handle (p. 4, fig. 2
3. Turn tank upside down and unscrew water tank cap (p. 4, fig. 3
counterclockwise.
4. Fill water tank with cold water. Do not fill all the way to the rim.
5. NOTE: If you have hard water, it is recommended to use filtered or distilled water.
While using the humidifier, if you see a film of white dust, it is because of hard
water.
6. DO NOT add any medication or other additives into the water tank itself. For use of
essential oils, see page 17.
7. Screw water tank cap back onto tank by turning clockwise.
8. Place tank onto the base (p. 3, fig. A
base. There should not be a space between the tank and base.
9. Place mist lid (p. 3, fig. A
desired direction of the mist.
10. NOTE: DO NOT move humidifier while water tank is on base. Water may leak into
the base causing a malfunction.
11. Plug the power cord into an electrical outlet. DO NOT use an extension cord.
12. Turn power on by turning the control knob (p. 4, fig. 5
right). You will hear a minor clicking noise when turning unit on and off. The
green power indicator light will turn on.
13. In a few moments, the mist will start coming through the mist lid. Use the control
knob to adjust the intensity of the mist output. Turning the knob clockwise will
increase the moisture output, turning the knob counterclockwise will reduce the
moisture output.
14. Note: When at maximum level, it is normal to hear a faint dripping sound.
15. Turn on the blue unit LED night light by pressing the 'LED On/Off' button (p. 4,
fig. 5
14
or
15
) off of base holding bottom of tank with both
2
1
) on top of water tank and turn mist lid to face
). To turn it off, press and hold the button for 2 seconds.
3
3
). Make sure it is laying flush into the
) when empty or full.
5
) by turning it
12
) clockwise (to the
Operation
15
Capítulos
Tabla de contenido
Solución de problemas
