Drilling The Holes - Bell'O ClassicFlame 36HF320FGT Manual Del Usuario

Installation - Wall Hanging Operation
1
Removing the Mounting Bracket
Remove the Mounting Bracket (A) from the back of the
Fireplace (C) by removing the two pre-attached Screws
at the top back of the unit.
3

Drilling the Holes

Drill six 1/4 in. (7 mm) holes in the wall.
Insert the Wall Anchors (BB) into the holes using
a hammer.
A474
2
Choosing a Wall Location
Choose a wall location to attach the Mounting
Bracket (A). Position the Mounting Bracket (A)
in the desired location.
Use a level to align the bracket and mark the four holes
with a pencil.
A
BB
10
www.tsicustomerservice.com