Main Specifications; Mounting Precautions (For Sharp Dealers And Service Engineers) - Sharp PN-V600 Manual De Instrucciones

Ocultar thumbs Ver también para PN-V600:

Manual de instrucciones (61 páginas)

página de 44

/ 44
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Model

Power requirement

Operating temperature *

Operating humidity

Power consumption (maximum)

Dimensions (excluding protrusions)

Weight

* Temperature condition may change when using the display together with the optional equipments recommended by SHARP.

In such cases, please check the temperature condition specified by the optional equipments.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement

without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

Mounting Precautions (For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

• When moving the monitor, be sure to hold it with either handles or the corners on the bottom of the unit. Do not hold the LCD

panel. This may cause product damage, failure, or injury.

• When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor

frame.

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

• Do not use any screw holes other than VESA holes for installation.

All manuals and user guides at all-guides.com