Kaiser Baas PhotoScanner Guia Del Usuario página 8

USING THE PHOTOSCANNER
Do not press any buttons while the PhotoScanner is scanning.
When the scan has finished, you will see a preview on the LCD screen.
You can use the on-board controls to zoom or to select other photos and documents
that you have scanned on the SD card.
Press the 'SCAN' button again when you are ready to scan.
12
USING THE PHOTOSCANNER
NOTES
• Keeping the photo or document flat and level when feeding prevents possible
jamming
• Keep the original photo or document free from fingers prints, oil or dust for optimum
scanned image quality
• Remove the photo from the sleeve after scanning to prevent the sleeve from
sticking
• Keep the sleeves in a safe place when not in use to prevent them from accumulating
dust
• Place the photo or document on the right edge of the feed slot and adjust the paper
guide so it aligns to the left hand side of the photo or document
• Gently push the photo or document in the feeding slot and let go when
it begins to feed into the slot
• When the scan has completed, a folder will be created on the SD card. Each scanned
image is given a file name with the prefix 'IMAG' followed by a 4 digit sequential
number in the order the images stored. For example IMAG0001, IMAG0002, etc
• When you have finished scanning, press and hold the 'on/off' button for 2 seconds
to turn off the PhotoScanner. You can now safely disconnect the power
and remove the SD card
13