Specific Safety Instructions; Instructions For Use; Placement Tool; Assembly - stayer HP750E Manual De Instrucciones

The machine is designed for sanding drywalls, ceilings
and walls of the inner and outer surfaces, clearing the floor
residues, paint coatings, adhesive and loose plaster etc.
Our machine is not suitable for processing the object
containing asbestos.
WARNING! Read this manual and general
safety instructions carefully before using the
appliance, for your own safety. Your power
tool should only be passed on together with
these instructions.
WARNING: Packaging materials are not toys!
Children must not play with plastic bags!
Danger of suffocation!
If any parts are missing or damaged, please
contact your dealer.
1. Contents
2. Specific safety instructions ........................... 13
3. Instructions for use ........................................ 13
3.1 Placement tool .................................................... 13
3.2 Assembly. ............................................................ 13
3.3 Electrical connection ........................................... 13
3.4 Ilustrated description ........................................... 14
4. Operating instructions ................................... 14
4.1 Placement and testing ........................................ 14
4.2.Tool change......................................................... 14
4.3.Tuning operations ............................................... 14
5. Maintenance and service instructions ......... 14
5.1 Cleaning .............................................................. 14
5.2 Repair service ..................................................... 14
5.3 Warranty ............................................................. 14
5.4 Disposal and recycling ........................................ 15
6. Regulations ..................................................... 15
6.1 Technical Data .................................................... 15
6.2 EU declaration of conformity ............................... 15

2. Specific safety instructions

- Keep your hands away from rotating sanding head
area at all times.
- Sanding lead-based paint is extremely toxic and should
not be attempted. Only allow professionals with special
training and equipment perform this task.
- Maintain proper footing and balance at all times. Use
proper scaffolding.
- Always wear appropriate safety equipment when
operating.
- Important: after completing sanding, switch off the
switch and wait for the coasting sanding head to stop
completely before putting the tool down.
- Never operate the tool in an area with flammable solids,
liquids, or gases. Sparks from the commutator / carbon
brushes could cause a fire or explosion.
ENGLISH
13
- There are certain applications for which this tool was
designed. The manufacturer strongly recommends
that this tool can not be modified and / or used for any
application other than for which it was designed.
- Immediately switch off the machine if unusual vibrations
or if other malfunctions occur. Check the machine in
order to find out the cause.
The dust that arises when working with this
tool can be harmful to health. Use a dust
absorption system and wear a suitable dust
protection mask and remove deposited dust
with a vacuum cleaner.
Denotes risk of personal injury or damage to the tool.
Read manual before
page
use.
In accordance
with essential
requirements of the
European directive(s).
"Class II - The machine is double insulated;
Earthing wire is therefore not necessary

3. Instructions for use

3.1 Placement tool

Carefully remove the tool and all loose items from the
shipping container.
Retain all packing materials until after you have inspected
and satisfactorily operated the machine.
Before setting up, repair or maintenance of the
appliance you must always turn off the operating
switch and pull out the mains plug!

3.2 Assembly

The machines come factory assembled, except the suc-
tion tube 9 plug one end of the hose 9 to the suction nozzle
10 (fig.2).
Mount auxiliary handle (fig.3)
- Tighten the side handle by turning 7.

Electronic control

This machine has the characteristics as below:
- Lock-on switch 5.
- Adjustable speed 4.

3.3 Electrical connection

The network voltage must conform to the voltage indicated
on the tool name plate. Under no circumstances should
the tool be used when the power supply cable is damaged.
13
TABLE SECURITy ICONS
Use protective
gloves.
Use masks,
helmets
and glasses.