Fein RSG Ex 1500 A Manual Del Usuario página 28

3 41 01 261 06 0.book Seite 28 Montag, 16. April 2018 12:03 12
en
28
Form 3, HSS, with tungsten teeth, for gear type:
b - For cutting cast iron pipes (even with cement collar) and unal-
loyed steel pipes to 400 N/mm
Ø Width Weight Number
of teeth
[mm] [mm] [kg]
160 4 0.5 40
180 4 0.7 44
200 4 0.9 50
Adjusting spring
W x H x L (mm)
6 x 6 x 32 4 02 21 044 00 0
8 x 7 x 32 4 02 21 050 00 5
Transport container
Length x Width x Height
mm mm mm
1000 x 800 x 395 3 39 01 114 00 7
Form cutter
V-form, HSS, for gear type:
a - for machining steel pipes, high-alloyed
b - for machining plain steel pipes and cast iron pipes up to a max.
wall thickness of 10 mm and a max. diameter of 1600 mm
D B Weight Number
of teeth
[mm] [mm] [kg]
125 25 1.58 32
160 30 3.2 36
160 30 3.3 36
180 42 5.5 36
180 42 4.9 36
U-form, HSS, for gear type:
a - for machining steel pipes, high-alloyed
b - for machining plain steel pipes and cast iron pipes up to a max.
wall thickness of 10 mm and a max. diameter of 1600 mm
D B Weight Number
of teeth
[mm] [mm] [kg]
160 25 2.8 40
2
Max. cutting Reference num-
depth ber
[mm]
25 6 35 02 080 00 8
35 6 35 02 061 00 9
45 6 35 02 084 00 2
ß = 30°
ß Max. Reference num-
cutting ber
depth
[mm]
30 25 6 35 08 056 00 4
30 25 6 35 08 081 00 9
37.5 25 6 35 08 093 00 0
37.5 25 6 35 08 094 00 0
30 25 6 35 08 085 00 8
ß = 8°
r = 6 mm
b = 4 mm
Max. cutting Reference num-
depth ber
[mm]
25 6 35 08 089 00 7
Gang cutters, HSS, for gear type:
a - for machining steel pipes, high-alloyed
b - for machining plain steel pipes and cast iron pipes up to a max.
wall thickness of 10 mm and a max. diameter of 1600 mm
D B Weig Number
ht of teeth
[mm] [mm] [kg]
154 30.5 2.5 32
Special form cutters for other materials and other cutting geomet-
ries upon request
Chain link
10 chain links x 63.5 mm = 635 mm
Reference number 3 02 31 013 02 7
1 chain link x 31.75 mm
Reference number 3 02 31 029 00 2
Spare bolt
Reference number 3 02 17 216 00 4
Spare securing ring
Reference number 4 26 34 020 00 5
Spitting wedges made of steel
Reference number 6 33 05 006 00 8
Splitting wedges, non-sparking
Reference number 6 33 05 013 00 2
ß Max. Reference number
cutting
depth
[mm]
30 25 6 35 08 099 02 0